FRITZ!Box
33
Configuring Internet Access for a Connection to an Existing Network
RFC 1483/RFC 2684), select the setting “No ac-
count information required (in accordance with
RFC 1483/RFC 2684)”.
8.
Enter the Internet account information you received
from your Internet Service Provider in the “Connection
Settings” area.
9.
Click the “Apply” button to transmit your entries to the
FRITZ!Box.
Now your Internet access is configured and all connected
computers can use this Internet connection at the same
time.
4.2
Configuring Internet Access for a Connection to an Existing Network
If you connected the FRITZ!Box to an already existing net-
work (LAN), a cable modem or a DSL router, proceed as fol-
lows to configure Internet access:
1.
Start a web browser.
2.
Enter
fritz.box
in the address field.
3.
Select the “Settings” menu.
4.
Select the the “Account Information” command from
the “Internet” menu.
5.
Select the connection type “Internet Connection via
LAN 1” in the “Connection” area.
Two different operating modes are possible for this kind of
connection. The following section presents separate in-
structions on how to proceed for each of these operating
modes.
Operating Mode “Establish own Internet connection (NAT
router with PPPoE or IP)”
In this operating mode the Internet connection is estab-
lished by the FRITZ!Box and made available to all connect-
ed network devices.
F!BoxFonWLAN-7170v2-e.book Seite 33 Freitag, 23. November 2007 3:41 15
