Avira Security Management Center | HowTo
Status: March 2010
39
In order to start the Installation of Avira AntiVir UNIX MailGate, click on the knot
security environment and as the case may be on the group/the computer where
Avira AntiVir UNIX MailGate shall be installed. Click with the right mouse button
on the group/the computer and choose
“Installation”
“Avira AntiVir MailGate
(UNIX)”
“Install”. The dialogue window Installation appears and has to be
confirmed by OK.
MailGate and the used MTA have to be configured now. Please, note the
necessary configuration settings in the manual Avira AntiVir MailGate UNIX
(chapter 4.4 Further installation passes dependent on the MTA).
In order to make the described changes in the configuration, click with the right
mouse button on the group/the computer and choose
“Configuration”
“Avira
AntiVir Mailate (UNIX)”
“configure”. Further Details about the configuration
can be found in the manual for Avira AntiVir UNIX MailGate (chapter 6
configuration).
MailGate is started automatically after the booting but is not started after the
installation. In order to start MailGate, click with the right mouse button on the
group/the computer and choose
“commands”
“AntiVir WebGate (UNIX)”
“Start”.
For the configuration of the updater via the SMC a separate software package is
needed the Avira AntiVir UNIX Updater (for SMC). The installation and
configuration of the Avira AntiVir UNIX Updater (for SMC) can be found in a
chapter in this description.
