Avira Security Management Center | HowTo
Status: March 2010
29
11.8 To reset or to transfer the Configuration
If a configuration about the “security environment” is modified for one product it
will be transferred to all pc’s in the “security environment” respectively in the
subgroups.
Exception:
In case a subgroup/pc has been separately configured in a special way by
deactivating the option “Transfer configuration” this group/pc will keep its
configuration and will not accept the superior configuration.
In order to make sure that the special configured subgroup/pc accepts the
superior configuration the special configuration of the subgroup/pc has to be
reset (“configuration”
“Avira AntiVir Professional”
“Reset all”).
Example:
The function “Transfer configuration” has been deactivated for the subgroup
“clients” and it has been configured in a way that the expert mode is not shown.
Via the superior group “security environment” a configuration has been chosen
which shows the expert mode.
The group “clients” will not accept this configuration as a special configuration
has been made here. If the configuration of the “security environment” shall be
accepted the configuration of the group “clients” has to be reset. Click with the
right mouse button on the group “clients” and choose “Configuration”
“Avira
AntiVir Professional”
“Reset all”.
In order to see which groups or pc’s have a transferred or a special configuration
click on the corresponding superior group (f. ex. “security environment”)
In the right half of the Security Management Center Frontend you can see if the
configuration is “special” or “transferred”.
Illustration 25: Security Environment transferred or specific configuration
