Avira Security Management Center | HowTo
Status: March 2010
37
The AV Guard is started automatically during the booting but it is not started
after the installation. This is shown in the SMC with the icons “Check product
status”. In order to start the AV Guard click with the right mouse button on the
group/the computer and choose
“Avira AntiVir Professional”
“Server (UNIX)”
“Start”.
If the Guard cannot be started and the error status remains it is possible that
dazuko (file access control) is missing on the server or has not yet been loaded.
All directories are supervised by the guard during an installation via the SMC.
Which directories shall be controlled can be changed in the registry “Basic
Settings” of the configuration. Click with the right mouse button on the
group/the computer and choose
“Configuration”
“Avira AntiVir Professional”
“Server (UNIX)”
“configure”. We recommend to supervise only a few
important directories (f. ex. enable share).
Details about the configuration of Avira AntiVir UNIX Professional/Server can be
found in the manual for Avira AntiVir UNIX Server (chapter 4 configuration).
For the configuration of the updater via the SMC a different software package,
the Avira AntiVir UNIX Updater (for SMC) is needed. The installation and
configuration is described in a chapter of this document. This concerns only Avira
AntiVir MailGate 2, Avira AntiVir WebGate 1 and Professional 2+ Server 2.
17.3 Installation and Configuration of the Avira AntiVir UNIX
Updater (for SMC)
The Avira AntiVir UNIX Updater (for SMC) allows to proceed all configurations
about the update and to start and to stop the automatic Internet Updater. It can
be used with all Avira AntiVir products for UNIX. Avira AntiVir MailGate 3 /
WebGate 2 use a new updater
The necessary software package is antivir-updateplugin-prof-<version>.tar.gz. It
has to be added to the software packages of the SMC just like the other product
packages.
The package can be downloaded from the website http://www.avira.com.´
In order to start the installation of the Avira AntiVir UNIX updater (for SMC) click
on the knot security environment and as the case may be on the group/computer
where the AntiVir UNIX
(
for SMC) updater shall be installed.
Click with the right mouse button on the group/computer and choose
“Installation”
“Avira Updater”
“(UNIX)”
“Install”. The dialogue windows
installation appears and has to be confirmed by OK.
The automatic Internet Updater carries out an update every two hours and is
started automatically during the booting. But it will not be started after the
installation. This is shown here:
“Views”
“Product Status”.
In order to start the automatic Internet Updater click with the right mouse
button on the group/computer and choose
“commands”
“Avira Updater
(UNIX)”
“Start”.
In order to change the configuration click with the right mouse button on the
group/computer and choose
“Configuration”
“Avira Updater ( UNIX)”
“configure”.