2
1.2 Dimensions
1.3 Power On
1) Power on: connect DC12V power supply adapter with NO.9 showed in Figure1.2.
2) Initialization: power on with power indicator light on and remote control receiver light blinking. Camera head
moves from bottom left to the central bottom, and then go to HOME position (intermediate position of both
horizontal and vertical), while the camera module initializes. When remote control receiver light stops blinking,
self-check is finished.
Note:
If preset 0 is set, the camera automatically moves to the preset 0 position upon powering on.
Содержание AV-1364
Страница 23: ...19 Figure 4 1 1 IP Configuration Interface...