41
a. check whether the camera serial protocol, baud rate, and address are consistent.
b. check whether the control cable is connected properly.
c. check whether the camera working mode is set to the normal operating mode (see Table 1.2 and Table 1.3).
6) Web Pages Cannot Log In
a. check whether the camera is displaying normally.
b. check whether the network cable is connected properly (Ethernet port yellow light flashing indicates normal
network cable connection).
c. check whether the proper segment is added to the computer, and is consistent with the IP address of the camera.
d. click "
Start
" and then "
Run
". Type in “cmd” and click "OK" to turn on a DOS command window. Enter ping
192.168.5.163., and press Enter to see whether a message shows as follows: Description network connection is
normal.
Содержание AV-1364
Страница 23: ...19 Figure 4 1 1 IP Configuration Interface...
