32
can only operate preview, playback, or logoff.
4) Version Upgrade
MCU version V2.0.0.16 2015-12-18
Camera version V2.0.0.16 2015-12-18
Focus version V2.0.0.6 2015-12-11
Version information above is read-only for users. It is consistent with the menu version and cannot be modified.
Different type of the machine has different information.
Update file:
Click "
Browse ...
" for installation. Select the upgrade file in the pop-up window.
Click "
Upgrade
", and the upgrade dialog window will appear. Device will reboot automatically after being updated
successfully.
Note:
make sure the power and network is connected during the process. Or the upgrade will fail.
Note:
after version upgrade, please restore default settings according to the following options:
a, Restore default settings through web configuration.
b, Restore default settings through camera menu.
c, Restore default settings using shortcut key combination* # 6 on remote control.
If use option a, the account and passwords will also be restored to default.
5) Restore Factory Settings
Click "
Restore Factory Defaults
" on the pop-up, and choose “yes”. Device will restart automatically and restore
factory settings.
6) Reboot
Click "
Reboot"
on the pop-up, and choose “
Yes
". Device will restart automatically.
4.2.8 Logout
Click
"Logout"
on the "
Confirmation
" pop-up dialog window. Select "
Yes
" or "
No
". Choose “Yes” to exit the
current page and return to the user login interface.
4.2.9 Wireless Network
If user's equipment has a wireless network module, then "Network Configuration" page will have "Wireless
Network" configuration option. Specific configuration is shown as below:
1)
Network Settings
Wireless network
configuration:
Network Interface Enable:
check to set the following items.
DHCP:
obtain IP automatically if checked.
IP Address:
set wireless WIFI IP (default: 192.168.1.250). If DHCP is checked, IP should be assigned
automatically).
Note:
wireless IP address cannot be in the same segment with wired IP address.
Subnet Mask:
set the wireless IP subnet mask (default255.255.255.0).
Default Gateway:
set the wireless IP default gateway (default 192.168.1.1).
SSID:
user can modify on their own (default: test).
Encryption:
password can be set if checked.
Password:
password can be changed if checked.
Click "
Save
". Settings will take effect after the message "saved successfully" shows.
Note:
SSID and password should be filled correctly, otherwise the wireless WiFi connection will not be available
Содержание AV-1364
Страница 23: ...19 Figure 4 1 1 IP Configuration Interface...
