IP POWER 9258-1U USER MANUAL
Password
: 12345678 (Password of the device)
When you use this command, 9258 you will get the following message output :
<html>P60=1,P61=1,P62=1,P63=0 , P64=1,P65=1,P66=1,P67=0</html>
* Schedule Control:
User can use HTTP command to arrange the 9258 operation in specific time
，
http
command format as follow:
http://username:[email protected]/Set.cmd?
CMD=SetSPower=**+YY=****+MM=**+DD=**+HH=**+MN=**+SS=**+PARAM=****+ONOFF=*
Explanations of each part of the order for the command
SetSchedulePower
:
IP Address (XXX.XXX.XXX.XXX
): 192.168.1.10 (IP Address of the device)
Username
: admin (Username of the device)
Password
: 12345678 (Password of the device)
Control parameter are 1A 1B 2A 2B 3A 3B 4A 4B .
A means connect power . B means discount power
YY=****+MM=**+DD=**+HH=**+MN=**+SS=*
: time parameter
YY : year ( 20YY ) , 01 = 2001
MM : month ( 0 1-12 )
DD : date ( 01-31)
HH : hour (24 hours : 0- 23)
MN : minute ( 1-60 )
SS : second (1-60)
PARAM=* : time schedule parameter . Parameter list as follow:
128 operate ONCE
127 EVERYDAY
31 MONDAY to FRIDAY
96 SATURDAY & SUNDAY
ONOFF=*
: operate parameter
0 open
1 close
Example 1
：
control power on / off of 9258
：
http:// /admin:[email protected]/Set.cmd?
CMD=SetSPower=1A+YY=2006+MM=02+DD=16+HH=06+MN=02+SS=16+PARAM=128+ONO
FF=1
Above command control one IP Power 9258 IP address at
192.168.1.0
, user name is
admin
and password is
12345678
. This 9258 will connect power of outlet1 (p60) on
2006/2/16 06:02
Note
：
1. Please use + to separate each parameter
，
you can only control certain power on /off as :
http://admin:[email protected]/ Set.cmd?CMD=SP60=1
2. Please follow the capital and lower case in command format.
VER1.50
- 27 -
