IP POWER 1U USER MANUAL
Setting of software shut down controlled PC/ Server
9258 can be used to safely turn off the PC/Server through Network. With this feature you can remotely
shutdown any PC/ Server which that is connected to the IP Power 9258 through normal Windows shut down
procedure. Before operating the software shutdown function it is essential to install our software:
1. Please install program “IP9258service.exe “ into the PC that will be controlled.
2. Documents created in programs like Microsoft office will not be automatically saved. The 9258 will still
shutdown the controlled PC/server without saving the file.
3. You will need to reserve enough time for controlled PC/Server to shutdown after receiving a command from
the 9258. Please set the delay time at 30 or 60 second in 9258 configuration webpage (
setup
delay
switch)
.
4. The controlled PC/Server must be in the same ETHERNET and the same SUBNET as the 9258..
Installing and Setup of the “IP9258service.exe”:
1. Insert the CD that came with the device into the PC that you want to be able to turn off.
2. Click on the
icon
3. On the left hand side click on the
Icon.
4. Go to the 9258 Series section and click on the Link that says Shutdown Program
5. Save to your desktop and double click “ IP9258config.exe”
，
to install the program:
- 12 -
