IP POWER 9258-1U USER MANUAL
(2) Your network card must also support “WOL”, remember to connect your connect cable to Main board or the
network card cannot send the “power on” message to your motherboard.
After both the motherboard and network card have been setup, you can use WOL function by following
the steps below:
Step 1: Log in 9258 web page and go to “Network Wakeup”
Step 2: Type in your MAC address then press “send” – the PC will be power ON.
Note:
1. If the Network card is not onboard card, it needs to connect with your Main board by cable. Please refer
your network card connection
2. You can get your MAC address in PC , please refer following pictures :
Go to Network sign
Status
Support
Details
Then the value in Physical Address “ is the PC` MAC address.
VER1.50
- 21 -
