IP POWER 9258-1U USER MANUAL
2b.
Manually enter network settings with Ipedit:
a.) You can manually enter the networks settings for the following:
The name
: (please use numbers or letter)
Gateway IP
: (The default gateways IP can be found using
IP Address
: (please set in the same subnet as your PC) in the text windows.
b.) Then click
Submit
after the settings have been selected. Wait about 20 seconds for the new settings to be
updated.
c.) Click
Rescan,
and the new device settings will display in text window.
Note:
1.) Make sure the RJ45 network cable is connected and the 9258-1U is powered on.
2.) * The default IP address of the 9258-1U is
192.168.10.100
. If you cannot get into the webpage of the
9258-1U, please make sure to set subnet of the IP Power 9258-1U to match with your PC Subnet Mask.
To obtain the IP information manually:
In Windows Go to:
a.) Start
Run
type in “cmd”
Hit enter and the MS –DOS window will open,
b.) Now type in “ipconfig”
The last set of numbers of the IP address can be any number between 1~254, but cannot
be same as your PC,
hub, router or any device in the network. If using in any PC, just use HUB and type the 192.168.0.100 in
Browser or use “IPDdit.exe “ then you can get in the web page.
* Same
SUBNET
: The first 3 sections of IP address is same - XXX.XXX.XXX.abc. The part of XXX must be
the same.
(E.g. IP address is
192.168.1
.100,
then another IP address
192.168.1
.123 is the IP in same subnet.)
5 .The default username and password of IP Power 9258 are:
Username: admin
Password: 12345678
VER1.50
- 11 -
