IP POWER 9258-1U USER MANUAL
6. Please fill correct information in each section :
*
IP9258 Address
: Please type in the IP address of the 9258.
*
HttpPort
: Fill the port of 9258, default value is 80, if amend the port in 9258 please correct.
*
UserName
: admin
*
Password
: 12345678 (password can amend in web page)
*
Power Number:
Please enter the power number in the 9258 that you want to control (If many PC/Server use
same power extended line, the extended line connect to channel 1 of 9258 and if all the PC /
Server set as channel 1 and same IP address in IP9258service.exe , then all the PC/Server
will be controlled at same time).
a.) Click on “
Save Change
“.
b.) Then Click “
Install Service
”
c.) Then
“
Start Service
” then please shutdown the PC/Server.
After the PC has been restarted, the function will be in effect.
6. Hardware control & setting
* This function teaches you how to use the hardware control the power on/off of the devices
NOTE:
This function is solely used for manually selecting which ports you need to be on or off. It was designed so that
you can still have the ability to turn on or off certain ports in the case you do not have Ethernet connection.
Before using the H/W control function, please UNPLUG all the 4 connection or ports connected to the
9258.
Control panel as follow:
VER1.50
- 13 -
