- 84-
Ref#9077033111
2.) Then type in the name of the person, email and the message.
3.) Once a message has been set it will look like the picture below.
Go to Device
So if for some reason, you need to connect to the device directly to modify some of the settings on your IP
Kamera. You can use the
go to device
button to directly open a internet browser and go to the camera.
To do this follow the following instructions:.
1.) Right click on the device that you would like to connect to and select go to device.
2.) Then enter the correct login and password into the internet browser to connect to the device.
10.) Frequently Asked Questions (F.A.Q)
Q1:
Why can’t I view the video files that I have recorded, nothing is playing?
Ans:
VLC Codec, download VLC Codec from their website at:
H
http://www.videolan.org/
Q2:
How do I reset the device to manufacturers default values?
Ans:
On the back of the device there is a reset button, hold down the reset button for more than 7 seconds.
Then give the 9077SPD-I/O a 1 minute to restart. Once the device has restarted it will be set back to
manufacturer default settings.
Default Values
Default IP
: 192.168.1.168 (When 9077SPD-I/O is connected to PC directly)
Default Login
: admin
Default Password
: 12345678
Q3:
Why does the device on EPTZ change my video mode?
Ans:
When EPTZ is activated Video Codec mode will be switched to MPEG4 & M-Jpeg when disabled the
codec will be set on Mpeg1, Mpeg2, & M-Jpeg.
Q4:
How do I take snapshots using the EPTZ function?
