- 34-
Ref#9077033111
X-Axis Patrol
The X-axis patrol will patrol two points on the horizontal X-axis.
To use this functionality try the following:
1.) First set the first point that you would like to patrol from. You can select the name the point by typing in a
name.
Note: Do not enter any spaces or characters for the point name.
2.) Then set the second point.
3.) Once the points have been set hit the scan button to start patrolling.
Multipoint PT
The Multipoint PT will allow the 9077SPD device to follow up to 16 points to view on. On each point you can
rename the point for convenience purposes.
When a point has been saved it will be shown in green highlight like the picture below.
PT Homing
PT homing is a functionality that will allow your device to return to the homepoint that was set in this section
within the allotted time.
To use this function do the following:
1.) Set a homepoint and save the point
2.) If you would like to use the return to homepoint function set it to on.
