- 80-
Ref#9077033111
Removing a device
To remove a device from Surf Pop all you need to do is go to the online cameras section and find the device
that you would like to remove. Then do the following:
1.) Right click on the camera that you would like to remove and right click.
2.) Then select the option that says delete camera.
Local Devices
The local device section is where you will find devices that are located in your Local Area Network or (LAN).
These devices will show up automatically when a device has been detected. Once detected you can
connect to the device or setup the device from this section.
Setting up a device
Surf pop was designed to create a quick user experience with the software. Any 9077SPD IP Kamera’s that
is on manufacturer default will be able to automatically be detected by surf pop and can easily be seen
without any setup. Simply just press and play.
But for people who have special network requirements or need to setup their device, you will need to do the
following:
1.) Select the device that you would like to setup and click on the setup device button.
2.) Then type in all the appropriate information including IP Address, Port, Username, Password, Country
and Location and hit submit
Note
:
This can only be done with Administrator rights. So if you are login in with a guest account no changes
can be made
