2.)
Open IPEdit and any device in the same network should automatically be detected and listed in the
local devices sections
.
Note: If the device is not showing up, please hit the rescan button and wait about 1 minute
Setup the Device:
All devices will need to be on the same network if not the device cannot be accessed and will not be
detected.
Quick Easy Setup (Recommended)
1.) Click on the REF button,
and wait a few seconds. IPEdit will automatically
detect the network settings and setup the device.
2.) Once settings have been detected hit the apply button to apply the new settings.
3.) Hit yes to confirm and Enter the login and password for the Device to Approve changes
-
15-
Ref#90020326K0709
