34
D400
anD
D400-D
ante
a-n
et
D
istributors
u
ser
G
uiDe
Dante Systems
A Dante-enabled mixing console or audio network can be connected to the D400-Dante to provide up to
32 channels from the Dante network to Personal Mixers.
To configure this system:
•
Connect a Cat-5 cable from the Dante network to the Dante
P
rImAry
port on the D400-
Dante’s front panel.
•
In the Dante Controller software, set the D400-Dante to operate at the same sample rate
as the other devices in the Dante network (44.1 or 48kHz).
•
Confirm that the D400-Dante is set for the proper Dante topology—
S
wItched
or
r
eduNdANt
—as defined by your Dante network’s setup.
•
Route up to 32 Dante network channels from transmitting devices to the D400-Dante
using the Dante Controller software.
•
Set stereo links as needed using the DIP switches on the front panel of the D400-Dante.
•
Connect Personal Mixers to the front-panel A-Net ports of the D400-Dante.
Sync
Power
1 – 16
Stereo / Mono
17 – 32
1
2
3
4
Primary
Out
5
6
7
8
Secondary
D400
e
Connect a Cat-5 cable from a Dante device to the Dante
P
rImAry
port on the D400-Dante.
Additional Dante devices can be added as needed by connecting them via the
S
ecONdAry
port on the
D400-Dante.