30
D400
anD
D400-D
ante
a-n
et
D
istributors
u
ser
G
uiDe
P
N
ote
:
For connections from the D400 and D400-Dante to Personal Mixers, shielded Cat-5e (or
better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part
15 Class B emissions limits.
Unshielded Cat-5e (or better) cable may be used on all other connections.
The A-Net outputs on the D400 and D400-Dante can be connected to any A-Net compatible device,
including other A-Net distributors, allowing flexible routing and system configurations as well as virtually
unlimited system expansion.
16-Channel Personal Mixing Systems
Analog Input
This system uses one D400 and a single analog input device or digital console card; 16 total network slots
are available to the Personal Mixers. To configure, connect the
A-N
et
O
ut
on the input device to
A-N
et
I
N
on the D400.
Out
Sync
Power
1
2
3
4
5
6
7
8
1 – 16
Stereo / Mono
17 – 32
In
Defeat Stereo Switches
1
17
33
49
A-Net Offset Base Slot
D400
e
A-n
et
o
ut
on the analog input device is connected to
A-n
et
I
n
on the D400.
The
A-N
et
O
FFSet
B
ASe
S
lOt
DIP switches on the D400 should be set to the default 1-16 setting (down,
down). Assign stereo links as needed. When using a single AN-16/i v.2 Input Module, be sure to set its rear
panel
S
lOt
r
ANge
switch to
1-16
.
The Slot Range must be set to
1-16
for 16-channel systems.
