28
D400
anD
D400-D
ante
a-n
et
D
istributors
u
ser
G
uiDe
Network Config Tab
The settings for the D400-Dante’s Primary and Secondary ports are found within the Network Config tab
of the Device View. Two settings are available in the drop-down menu. When set to
S
wItched
, both ports
are identical; Dante devices can be daisy chained. When set to
r
eduNdANt
, the Secondary port will serve
as a redundant copy of the data appearing at the Primary port. Note that using the Redundant setting
requires that the network be configured using a pair of gigabit switches.
Choose either Switched or Redundant from the drop-down menu.
Refer to the Audinate Dante Controller user guide for additional information about using this software as
well as setting up a redundant Dante network.