31
D400
anD
D400-D
ante
a-n
et
D
istributors
u
ser
G
uiDe
Digital Console Card
This system uses a single console card and one D400 A-Net Distributor. A compatible Pro16 digital console
card from any of Aviom’s technology partners may be substituted for the Y1 Yamaha card shown in the
diagram. Connect
A-N
et
O
ut
on the console card to
A-N
et
I
N
on the D400 with a standard Cat-5 cable.
Out
Sync
Power
1
2
3
4
5
6
7
8
1 – 16
Stereo / Mono
17 – 32
In
Defeat Stereo Switches
1
17
33
49
A-Net Offset Base Slot
D400
e
A-n
et
o
ut
from the console card is connected to
A-n
et
I
n
on the D400.
The
A-N
et
O
FFSet
B
ASe
S
lOt
DIP switches on the D400 should be set to the default slots 1-16 setting. Assign
stereo links as needed. Stereo links may be created on the console card or on the D400.
About A-Net Offset Base Slot
The A-Net Offset Base Slot DIP switches on the D400 are used to select which bank of 16 channels should
be mapped onto the Personal Mixer’s channel buttons. For 16-channel systems, these DIP switches should
be set to Slot range 1, both switches down. Setting the DIP switches to any other range will route non-
existent network channels to the Personal Mixers.
Out
Sync
Power
1
2
3
4
5
6
7
8
1 – 16
Stereo / Mono
17 – 32
In
Defeat Stereo Switches
1
17
33
49
A-Net Offset Base Slot
D400
e
Set the Base Slot to “
1
” for 16-channel systems.
Stereo Links
The D400 and D400-Dante have a set of front-panel Stereo Link DIP switches that are capable of linking
adjacent odd/even channel pairs in the A-Net stream. You have the option of using the stereo link switches
on the network’s input device (analog input module or digital console card)
or
on the D400. If the stereo
links are set at the network’s input device, set the
d
eFeAt
S
tereO
S
wItcheS
DIP
switch in the down position;
links from the D400’s front panel are ignored.
