11
D400
anD
D400-D
ante
a-n
et
D
istributors
u
ser
G
uiDe
A-Net In, D400
The
A-N
et
I
N
port is available only on the D400 A-Net Distributor. It can accept the A-Net digital data
coming from the
A-N
et
O
ut
port of any Pro16 or Pro16e device. Pro16 data has a maximum of 16 channels;
Pro16e data has a maximum of 64 total channels.
The A-Net digital data connected to the D400 can come from:
•
a single Pro16 analog input module such as the AN-16/i-M Mic Input Module
•
a single Pro16e analog input module such as the AN-16/i v.2 Input Module
•
a maximum of four AN-16/i v.2 Input Modules cascaded together
•
one Pro16 analog input module and up to three AN-16/i v.2 Input Modules
•
a single Pro16 A-Net console card
•
one Pro16 console card and up to three AN-16/i v.2 Input Modules
•
the A-Net Out from another A-Net Distributor
•
a single Pro16 output from a Pro64 ASI A-Net System Interface
•
a single Pro16 output from a Pro64 ASI A-Net System Interface and up to three AN-16/i v.2
Input Modules
Dante Connections, D400-Dante
The Dante interface on the D400-Dante A-Net Distributor has two gigabit network ports labeled
P
rImAry
and
S
ecONdAry
. The Dante
S
ecONdAry
port can be configured to be a pass-through port or a redundant copy
of the
P
rImAry
port. The D400-Dante supports sample rates of 44.1kHz and 48kHz coming from the Dante
network. No sample rate converters are available on the D400-Dante.
Sync
Power
1 – 16
Stereo / Mono
17 – 32
1
2
3
4
Primary
Out
5
6
7
8
Secondary
D400
e
The D400-Dante has two Dante jacks, Primary and Secondary.
