Avidyne IFD410 FMS/GPS, Руководство пилота

Страница: 177 / 380

IFD400 Series Pilot Guide
Aux Subsystem 4-17
The second step is to create the checklist content. To create the
checklist content, select the checklist title that is to be filled out
from the directory list. First put the system back into checklist edit
mode by tou
ching the “Edit” box again or using the bottom right
knob to select it and then pushing the knob. This will produce an
empty gray checklist step item.
Touch or use the bottom right knob to select the step to be
created or edited and this will put a bright blue outline around the
step. Touch the highlighted row a second time or push in the
bottom right knob to generate a keypad. Type the desired text
(Note: there is no ability to manually generate upper case
characters) and then press the “Enter” button to accept. This will
generate another empty gray checklist step item below and
repeat the process as required. When done creating all the
desired checklist steps, press the “Edit” button in the top right
corner again to exit edit mode.
Creating/Editing a Checklist
Editing a Checklist
To edit an existing checklist, touch or use the bottom right knob to
select the “Edit” button, then touch again or push the knob putting
the system in edit mode. This automatically creates a new step at
the end of the checklist
– if that’s what you want, then just start
typing on the keyboard. If instead, an existing step is to be edited,
then select the checklist step to be edited by touching it or using
the inner knob. Touch the step a second time or push the knob to
generate a keyboard, press the CLR button (keyboard or bezel)
as required to clear characters and then re-type as required. To
insert a missing/extra step, type the step as desired as the last
step of an existing checklist and then turn the outer knob to insert