Avid Technology Avid Adrenaline, Руководство пользователя

Страница: 27 / 54

System Connections and Configurations
27
HP xw8 2 00 System Slot Configuration and Connections
Avid has qualified the xw8200 system with the NVIDIA
®
Quadro
®
FX 1300
graphics board to be used with the Avid Adrenaline. Other PC systems and
graphics boards might be qualified at a later date.
The following table lists the Avid qualified slot configuration for the xw8200
system. The following figure identifies the slots and connections on the rear of
the xw8200 system.
c
The ATTO
™
3300 and 3305 Fibre Channel boards are designed for
100 MHz PCI-X bus slots. If these Fibre Channel boards are installed into
a PCI-X 133 MHz bus slot, you will experience data corruption and data
loss. Make sure you install ATTO 3300 or 3305 Fibre Channel board in a
PCI-X slot that runs at 100 MHz or less.
HP Workstation xw8200 Slot Assignments
Slot Description
PCI slot 1 (32-bit, 33 MHz, 5 V) Do not use. (This bus segment is used by the integrated 1394 and the
integrated Ethernet.)
n
An on-board Ultra 320 SCSI connector panel occupies this
location. The on-board SCSI is on the same bus segment as
slots 6 and 7.
PCI Express slot 2 (x16 Graphics bus) Qualified OGL graphics board
PCI slot 3 (32-bit, 33 MHz, 5 V) Do not use. This bus segment is used by the integrated 1394 and the
integrated Ethernet.
PCI Express slot 4 (x8 mechanically,
x4 electrically) Do not use. Currently, Avid has not qualified any boards for this slot.
PCI-X slot 5 (64-bit, 133 MHz, 3.3 V) (Option) Avid Unity
™
LANshare EX or Avid Unity PortServer gigabit
board or second 1394 board. See “Ethernet Support” on page 42 for
more Ethernet informations.
c
Do not install the ATTO 3300 or 3500 Fibre Channel board
in this slot.
n
If you install a second 1394 (FireWire) board, make sure that it
runs on 3.3 volts or is a Universal board. Universal boards
operate at 5 volts and at 3.3 volts.