Avid Technology Avid Adrenaline, Руководство пользователя

Страница: 25 / 54

System Connections and Configurations
25
Connecting a Client Monitor
To view the video as it passes through the Avid Adrenaline, you might want to
connect a Client monitor. All analog video outputs are active when you play a
sequence or when you capture data. A Client monitor can be connected to any
of the following video outputs on the SD video I/O board (see
“SD Video I/O
Board Connectors” on page 11 ):
• Component
• Composite
• SDI
• S-Video
• DV
c
If you use the DV connection for a Client monitor, Avid cannot guarantee
that the DV device will be synchronized with the playing of the data in the
system.
A Client monitor can be connected to of the following video outputs on the
HD video I/O board (see
“Avid DNxcel Board Connectors” on page 10 ):
• HD Monitor Out
• HD Component Out
Most video decks provide a video output connector. You can connect a
monitor to the deck to see the video sent to the Avid Adrenaline or the video
the Avid Adrenaline sends to the deck. See the documentation that came with
your video deck for more information.
c
The video you see in the monitor connected to the deck might not indicate
there is a video signal going to the Avid Adrenaline.
System Connections and Configurations
The Avid Adrenaline has been tested with the following PC and Macintosh
products, which are used as examples in this document:
• HP
®
Workstation xw8200
• HP Workstation xw8000