Connecting Peripheral Equipment
19
4. Locate another component video cable and attach it to the Avid
Adrenaline outputs as follows (see the previous figure):
a.
Connect the BNC attached to the green wire to the component output
connector labeled Y.
b.
Connect the BNC attached to the red wire to the component output
connector labeled PR.
c.
Connect the BNC attached to the blue wire to the component output
connector labeled PB.
5. Attach the other end of the component cable to Component input of your
video deck as follows:
a.
Connect the BNC attached to the green wire to the component input
connector labeled Y.
b.
Connect the BNC attached to the red wire to the component input
connector labeled R-Y.
c.
Connect the BNC attached to the blue wire to the component input
connector labeled B-Y.
n
Make sure you terminate the input signal if your video deck supports
passthrough. See the documentation that is provided with your video deck.
Connecting a Video Deck — Composite Signal
A composite video deck connection requires the following:
•
Two composite video cables with BNC connectors at both ends
•
A video deck with composite inputs and outputs
Содержание Avid Adrenaline
Страница 54: ...Using the Avid Adrenaline 54...