Avid Technology Avid Adrenaline, Руководство пользователя

Страница: 22 / 54

Using the Avid Adrenaline
22
4. Locate another serial digital cable and attach it to the SDI OUT on the
Avid Adrenaline SD video I/O board or HD SDI OUT on the
Avid DNxcel board (see the previous figures). You can use either SDI
OUT connectors on the two boards.
5. Attach the other end of the serial digital cable to the serial digital input on
the video deck.
n
Make sure you terminate the input signal if your video deck supports
passthrough. See the documentation that is provided with your video deck.
Connecting S-Video or DV Signals
The S-Video and DV connectors on the rear of the Avid Adrenaline use
industry-standard connectors. The connections are as follows:
• There are two S-Video connectors on the rear of the Avid Adrenaline. One
connector is for video input, and the other is for video output. The
following figure identifies the connectors.
• The DV connector uses a 4-pin 1394 cable that carries the video and audio
input and output signals to and from your DV device. You can also use a
4-pin to 6-pin DV cable if your DV device uses a 6-pin connector. The
following figure identifies the connector.
Connecting S-Video or DV to the Deck
ANALOG IN
ANALOG OUT
ANALOG IN ANALOG OUT
GAIN
GAIN GAIN
1 2 3 4
REF Y PR PB Y PR
PB
COMPOSITE
COMPOSITE
S-VIDEO
1/2 3/4 1/2 3/4
IN OUT
OUT
DV
HOST
LTC 1394
GAIN 2 GAIN 1
MONITOR
1
2
SDI IN SDI OUT SDTI OUT
AES/EBU SPDIFF OPTICAL
WORD
CLOCK
OUT
IN
HD SDI IN HD SDI OUT HD MONITOR OUT
DVI-I
Y PB PR
HD TRILEVEL
SYNC
OUT 1 OUT 2
HD COMPONENT OUT
TM
OUT IN
4-pin DV
S-Video input
S-Video output