Aviat Networks ECLIPSE EDGE, Руководство пользователя

Страница: 239 / 274

260-668080-001 Rev 002 March 2013 3
Eclipse Edge User Manual
Table 3-1.
Required Tools and Material
Unpacking Edge Installation Equipment
To unpack the equipment:
1. Open the shipping boxes, carefully remove the equipment and place it on a clean,
flat working surface.
2. Ensure all the basic components and accessories for your system have been
included in the shipment by comparing the packaging, component part numbers
and product descriptions against the packing list, and cross-checking against the
installation datapack for the system to be installed.
3. If there has been shipping damage or there are discrepancies between the
equipment expected and the equipment received, contact an Aviat Help Desk or
Equipment Tool/Material Description
Antenna
As required by the
manufacturer Aviat Networks offers antennas from several suppliers.
Refer to the manufacturer’s data supplied with each
antenna for required and recommended installation
tools and equipment.
Eclipse Radios
Basic electrician’s
toolkit The kit must include a crimp tool for attaching lugs to
stranded copper cable and a multimeter.
Metric spanners or
socket set For attaching the mounting collar to its antenna, and
attaching the ODUspe to the mounting collar.
Torque wrench Capable of 40 Nm, with a selection of sockets for
antenna mount fastening
Crimp tool for shielded
RJ-45 connectors Crimp tool for crimping the shielded RJ-45 connectors
onto the Cat 5e ODU cable. NOTE: the fully shielded
RJ-45 connector used with the weatherized Cat5
ODU cable requires a crimp tool that includes
jaws to clamp the strain relief. Refer to the Edge
Product Ordering Guide for details.
Hot-air gun For use on heat-shrink tubing.
Protective grease and
zinc-rich paint For weather-protecting grounding attachment points
on towers and grounding bars.
BNC cable To access the RSSI voltage at the ODU for antenna
alignment. This could be a BNC to banana-plugs cable
for connection to a multimeter. Such a cable is
available as an optional accessory from Aviat
Networks. Refer to Accessories in the Eclipse Product
Ordering Guide.
4mm
2
(#12) green
PVC insulated strand
copper wire and
grounding lugs
For grounding the indoor unit to the rack/frame
16 mm
2
(#6) green
PVC insulated strand
copper wire and
grounding lugs
For grounding the rack to the station ground