O P E R A T I N G I N S T R U C T I O N S
45
Filling the engine with oil
n
Unscrew the filler neck cap.
n
Keep the environment perfectly clean
when adding the oil.
n
Do not fill the oil above
MAX
mark.
n
When the oil level is correct, mount
the cap again.
FN0460cu
Turbocharger
n
Keep the environment clean and
avoid mechanical damage to impeller
of centrifugal blower by sucking in the
mechanical dirt (for example during
operation without installed coarse air
filter).
n
Before stopping the engine from a
full load operation, allow it to run at idle
for one minute at least (see the label on
the instrument board) to secure the
cooling down of turbocharger by oil and
thus to avoid burning-in of carbon on
the turbocharger shaft.
U
FN0441
n
If the turbocharger is defective,
have it repaired at the authorized
service station.
n
To increase the service life of
turbocharger, keep the air filter
and the whole intake manifold
perfectly clean.
Warning!
Содержание D 100
Страница 66: ...OPE RAT IN G INST RU CTIONS 66 ...
Страница 83: ...83 TRO UBLES HOOT ING ...