AVG-UHMS88
Note:
1) Please disconnect all the twisted pairs before sending command EDIDUpgrade[X].
2) In above commands, “[”and “]” are symbols for easy reading and do not need to be typed in actual operation.
3)
Please remember to end the commands with the ending symbols “.” and “;”.
4) Type the command carefully, it is case-sensitive.
5.3.5 RS232 Control Modes
To control the AVG-UHMS88, you need to connect its 9 pin female RS232 port to a PC’s RS232 port, or you can
just connect any one of the HDBaseT receiver’s RS232 port with PC (RS232 command can be transmitted to the
AVG-UHMS88 via the twisted pair). By using RS232 control software and with right specification settings, you are
%9971.
Check the connection status of the inputs.
In 1 2 3 4
Connect
N
Y
Y
Y
In 5 6 7 8
Connect N Y Y Y
%9972.
Check the connection status of the outputs.
Out 1 2 3 4
Connect
N
Y
Y
Y
Out 5 6 7 8
Connect N Y Y Y
%9973.
Check the HDCP status of the inputs.
In 1 2 3 4
HDCP N N Y Y
In 5 6 7 8
HDCP N N Y Y
%9974.
Check the HDCP status of the outputs.
Out 1 2 3 4
HDCP N N Y Y
Out 5 6 7 8
HDCP N N Y Y
%9975.
Check the I/O connection status.
Out 1 2 3 4
In 1 2 3 4
Out 5 6 7 8
In 5 6 7 8
%9976.
Check the output resolution.
Resolution
Out
1
0000x0000
Out
2
1920x1080
Out
3
1920x1080
Out
4
1920x1080
Out
5
0000x0000
Out
6
1920x1080
Out
7
1920x1080
Out 8 1920x1080
%9977.
Check the status of digital audio of output channels.
Out 1 2 3 4
Audio Y Y Y Y
Out 5 6 7 8
Audio Y Y Y Y
%9978.
Check the HDCP compliant status of the inputs.
In 1 2 3 4
HDCPEN Y Y Y Y
In 5 6 7 8
HDCPEN Y Y Y Y
