AVG-UHMS88
turn on and last for 3 seconds. Then output 2 corresponds to input 1.
5.1.4 Clear operation
When you switch output channel, learn EDID data, or set EDID data, press Clear button to withdraw the
operation before you press “ENTER” to carry it on. When you press it, the matrix will return to the previous status.
5.2 IR Control
By using IR & HDBaseT transmission technology, the AVG-UHMS88 has some functions as follows:
1) Control far-end output device from local matrix location.
2) Control local input/output device remotely.
3) Control the AVG-UHMS88 locally/remotely.
5.2.1 Usage of IR Remote
Standby button, press it to enter/ exit standby
mode
Input channels, range from 1~8,
corresponding IR signal switched
synchronously when switching input
channels.
Menu buttons, ALL, EDID and CLEAR, same
with the corresponding front panel buttons.
Please refer to 4.1 Front Panel Button
Control for details.
: Navigation buttons.
ENTER: Confirm button.
Output channels, range from 1~8.
Each channel has 1 IR IN, 1 HDBaseT, 1
RS232, and 1 AUDIO outputs, and channel
1~4 have HDMI outputs.
Note: With this IR remote, AVG-UHMS88 can be controlled by the built-in IR, the extended IR receiver connected
to the “IR EYE”/”IR ALL IN” and the IR receiver on the far-end receiver.
