AVG-UHMS88
5.3.4 RS232 Communication Commands
Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none
Command
Function
Feedback Example
System Commands
/*Type;
Query the models information.
MHD88TP-N
/%Lock;
Lock the front panel buttons on the Matrix.
System Locked!
/%Unlock;
Unlock the front panel buttons on the Matrix.
System Unlock!
/^Version;
Query the version of firmware
VX.X.X
/:MessageOff;
Turn off the feedback command from the com port. It will
only show simple words like “SWITCH OK!”.
/:MessageOff;
/:MessageOn;
Turn on the feedback command from the com port.
/:MessageOn;
Demo.
Switch to the “demo” mode, convert input and output in
turn like1B1, 1B2, …8B7, 8B8, 1B1… and so on .The
switching interval is 2 seconds.
Demo Mode
Undo.
To cancel the previous operation.
Undo Ok!
Operation Commands
[x]All.
Transfer signals from the input channel [x] to all output
channels
X To All. (X=1~8)
All#.
Transfer all input signals to the corresponding output
channels respectively like 1->1, 2->2…
All Through.
All$.
Switch off all the output channels.
All Closed.
[x]#.
Transfer signals from the input channel [x] to the output
channel [x].
X Through. (X=1~8)
[x]$.
Switch off the output channel [x].
X Closed. (X=1~8)
[x]@.
Switch on the output channel [x].
X Open. (X=1~8)
All@.
Switch on all output channels.
All Open.
