AVGear AVG-CS4K-88, Руководство пользователя

Страница: 9 / 32

AVG-CS4K-88
3.2 HDBaseT Receiver
1. Front Panel
No. Name Description
①
HDMI OUT Connect to a HDMI display
②
IR IN
Plug in the 5V IR receiver, this will receive the IR signals from a
remote and send through to the Matrix Switcher and then control
the desired source
③
IR OUT
Plug in the 5V IR emitter and attached to the fornt of the display,
this will send the IR signals from the Matrix Switcher to control
the display which is connected to the HDMI OUT port
2. Rear Panel
No. Name Description
①
Power
Indicator

OFF: No power;

RED : DC power present (PoC).
②
TP IN
The RJ45 socket has two LED status indicators. Plug in the Pre-
installed CAT cable in to the HDBT RJ45 socket

HDCP : HDCP compliance indicator

OFF: No HDMI traffic (no picture)

GREEN : Signal with HDCP.

Blinking GREEN : Signal without HDCP