AVG-CS4K-88
Monitoring area, for
commands
received.
Command Sending
area
Parameter configuration
area
Here we use the software
CommWatch.exe
as example. The icon is showed as
below:
The interface for the control software is shown below:
Please set the parameters for COM port, baud rate, data bit, stop bit and the parity
bit correctly, only then will you be able to send a command in the Command Sending
Area.
5.3.4 RS232 Communication Commands
Note
:
1)
Please disconnect all twisted pairs before sending command EDIDUpgrade[X].
2)
In the
above commands, “[”and “]” are symbols for easy reading and do not need
to be typed into the actual operation command.
3)
Please remember to end the commands with the end
symbols “.” and “;”.
4)
Type the command carefully, it is case-sensitive.
Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none
