AVG-CS4K-88
Command
Function
Feedback Example
/%[Y]/[X]:[Z].
HDCP management command.
[Y] is for input (value: I) or output (value: O); [X]
is the number of the port, if the value of X is
ALL, it means all ports; [Z] is for HDCP
compliant status, the value may be 1 (HDCP
compliant) or 0 (not HDCP compliant).
/%[Y]/[X]:[Z].
DigitAudioON[x].
Enable HDMI audio output of port x.
X=1 ~ 8 enable this port.
X=9, enable all ports.
DigitAudio ON with [x]
DigitAudioOFF[x].
Disable HDMI audio output of port x.
X=1 ~ 8 disable this port.
X=9, disable all ports.
DigitAudio OFF with [x]
EDIDH[x]B[y].
Input port [y] learns the EDID from output port
[x].
If the EDID data is available and the audio
section supports not only PCM mode, then
force-set it to support PCM mode only. If the
EDID data is not available, then set it as
initialized EDID data.
EDIDH4B3
EDIDPCM[x].
Set the audio section of input port [x] to PCM
format in EDID database.
EDIDPCM1
EDIDG[x].
Get EDID data from output [x] and display the
output port number.
Hexadecimal EDID data
and
carriage
return
character
EDIDMInit.
Restore the factory default EDID data of every
input.
EDIDMInit.
EDIDM[X]B[Y].
Manual EDID switching. Enable input[Y] to
learn the EDID data of output[X]. If the EDID
data is not available, then set it as initialized
EDID data.
EDIDM[X]B[Y]
EDIDUpgrade[x].
Upgrade EDID data via the RS232 port.
[x] is the input port, when the value of X is 9,
this will upgrade all input ports. When the
switcher receives the command, it will show a
message to prompt you to send an EDID file
(.bin file). Operations will be canceled after 10
seconds. Please disconnect all HDBaseT ports.
Please send the EDID
file
EDID/[x]/[y].
Set the EDID data of input port [x] to built-in
EDID No.[y].
[y]=1 ~ 6, correspond to the 6 embedded EDID
data separately
EDID/[x]/[y]
UpgradeIntEDID[x].
Upgrade one of the 5 embedded EDID data, x
is the serial number for the EDID data:
1. 1080P 2D 2CH
2. 1080P 3D 2CH
3. 1080P 2D Multichannel
4. 1080P 3D Multichannel
5. 3840x2160 2D (30Hz)
6. 3840x2160 2D (60Hz)
When the matrix receives the command, it will
show a message to send EDID file (.bin file).
Control will be disabled for 10 seconds
.
Please send the EDID
file
GetInPortEDID[X]
Return the embedded EDID data of input [x],
[x]=1 ~ 8
GetIntEDID[x].
Return the embedded EDID data ranked x, [x]
= 1 ~ 6
