Avery Weigh-Tronix WI-150, Руководство по обслуживанию

Страница: 23 / 46

20
If the indicator's memory, calibration or other data becomes corrupted, a
reset menu will become active.
RESET will be displayed telling you there
has been a problem. You may also choose to perform a Master Clear to
reset the setup, adjust or data values to default values.
Performing a Master Clear gives you access to the first reset menu shown
below. If the indicator found a problem with itself, you will see the second
menu. In either case, you must turn switch S1-1 on before you can reset
setup or adjust items.
To perform a Master Clear follow these steps:
1. Disconnect the unit from its
power source, hold the 8 and the
ZERO/CLEAR keys down, and
reconnect the power source to
the indicator.
CODE NO. is displayed.
2. Press SELECT . . . 0 is displayed.
3. Enter in the security code
number (150), then press
SELECT . . .
CODE NO. is displayed.
You must enter the security code number before you can reset any items.
4. Press MENU . . . RESET is displayed. From here you
can access the rest of the menu
items the same as you do for all the
other menus.
If SETUP, ADJUST, or DATA are set to defaults, they will not appear in the
menu.
If
SETUP, ADJUST, or DATA appear, you have the option to reset one, two,
or all three of them to default values.
Reset Menu and Master Clear
ALL - Includes Setup, Adjust, and
Data
SETUP - Configuration selections
ADJUST - Calibration settings
DATA - User entered
Master Clear Menu
The only items active for a
reset or master clear are those
items that are not set to the
factory defaults.
Do not reset anything unless it
is absolutely necessary. If you
reset ADJUST, this may mean
you have to bring in a weight
truck to re-calibrate your
system.