Avery Weigh-Tronix WI-127, Руководство пользователя

Страница: 22 / 23

18
Loadcell — Displays the factory normalized loadcell input. With LOAdCELL
displayed, press ENTER to view the counts. Press UNITS to
toggle between the counts display mode and mV/V display mode.
Span is 200,000 counts per millivolt per volt. Press ESCAPE to
return to LOAdCELL.
Serial — Allows testing of the internal serial ports. With SEriAL dis-
played, press ENTER to select the port to test. Port 1 is always
the internal serial port. (Port 2 and 3 are only offered if extra
serial ports are installed.) Press ENTER again to view ready/
busy. Then press MENU to view loop/no loop. Press ESCAPE
to return to SEriAL.
Outputs — Allows testing of the outputs. With OutPutS displayed, press
ENTER twice to cycle through the available outputs in sequen-
tial order. Press ESCAPE—SEqUEnCE is displayed. Press
MENU to view the available outputs. Press ENTER to view the
status of the outputs. The outputs are numbered left to right,
starting with one. A "1" indicates the output is activated; a "0"
indicates the output is deactivated. To change the status of the
ouput, move the decimal point to the right of the output you
wish to change. Toggle the status by pressing ENTER. If the
optional I/O board is installed, an additional eight outputs are
available under Out. 9-16. Press ESCAPE to return to
OutPutS.
Inputs — Allows testing of the inputs. With InPutS displayed, press
ENTER—StAndArd is displayed. Press ENTER again to view
the status of each input. The inputs are ordered 1-8 from left to
right. A "1" indicates the input is activated; a "0" indicates the
input is deactivated. If the optional I/O board is installed, an
additional eight inputs are available under OPtion. Press ES-
CAPE twice to return to InPutS.
Voltages — Allows testing of the power supply voltages. With VoltAGES
displayed, press ENTER to test the unregulated loadcell
excitation power supply voltage (13 volts). Press MENU
repeatedly to scroll through the remaining power voltages:
the -5 volt excitation voltage (-5 volts), the unregulated 5 volt
logic supply voltage (10 volts), and the relay supply voltage (24
volts). Press ESCAPE to return to VoltAGES.