Avery Dennison ALS 380 Скачать руководство пользователя страница 78

Страница: 78 / 90

PERATIONAL

MALFUNCTIONS

6.1 W

ARNING

MESSAGES

ALS

380

6.1.1

Please observe:

CAUTION!

Improper handling of the machine, especial-
ly changes to the settings, can lead to seri-
ous damage to the machine and system and
can cause work-related accidents!
– Only the responsible servicing techni-

cians or customer service personnel are
authorized to make changes to the set-
tings in the configuration menu.

➔

Ensure that the other settings are carried
out exclusively by specifically trained
and knowledgeable personnel.
Observe the expert symbols.

➔

Observe the additional information in this
operating instruction or in the service
guide.

6.1.2

If a problem occurs

The control system detects a problematic or unaccept-
able situation:
– A warning message is displayed on the operator

panel.

– As a rule, the labelling operation is continued, if the

operator does not stop the machine.

If the cause of the warning message is eliminated:
– The warning code is no longer displayed.

6.1.3

Warning messages

Message

Description

Possible causes and remedies

W__0

Product was not labelled.

➔

Remove the unlabelled product.

Several labels are missing from the label ribbon:

➔

Replace the label roll if the error occurs frequently.

The distance between the products on the conveyor
belt is insufficient:

➔

Increase the product distance.

➔

For circumferential labelling: Increase the rotation-
al speed.

The product triggers several start signals, caused by
reflections, for example:

➔

Adjust the product length (PRDL).

When using a printer, the printing time is too long:

➔

If possible, decrease the printer dwell time
(PDWT).

➔

Start printing process before label stop (PDT).

PERATIONAL

MALFUNCTIONS

6.1

WARNING MESSAGES

Содержание ALS 380



























































































Результаты поиска

Содержание ALS 380

Отзывы:

Похожие инструкции для ALS 380

Бренды по названию

Популярные бренды

Avery Dennison ALS 380, Руководство по эксплуатации

Результаты поиска

Содержание ALS 380

Отзывы:

Похожие инструкции для ALS 380

Бренды по названию

Популярные бренды