avertX NV160 Series, Руководство пользователя

Страница: 66 / 96

66
For remote access, you need to know the basic network information of
your recorder.
Follow these steps to determine the IP address, Subnet Mask, and
Default Gateway (which is the router address) of your recorder.
1. Be sure that your recorder is connected to the internet through the
Ethernet connection.
2. On the hover menu, click Setup .
3. Click
Network Setup
under
System Setup
.
4. Click General Settings .
5. By default the DHCP function on you recorder is set to On .
Note AvertX recommends the IP address of the NVR be reserved in
the network routers Dynamic Host Communication Protocol
(DHCP) address space.
6. The following information will appear. Write it down on a piece of
paper.
 IP Address
 Netmask
 Gateway
 DNS
7. Click Close
If you are using a DDNS account to access your recorder remotely, or
have an IP address, Netmask, Gateway, and DNS you want to use
other than that assigned by DHCP, follow these instructions. If you are
unsure, contact your system administrator.
1. Be sure that your recorder is connected to the internet through the
LAN network port on the back of the unit .
2. On the hover menu, click Setup .
3. Click Network Setup under System Setup .
4. Click General Settings .
5. Click DHCP and select Off .
6. Use the on-screen keyboard to type your desired IP address,
Netmask , Gateway , and DNS into the appropriate fields.
7. Click Close