63
number in second for the program to continue recording after the alarm has ended. The time range is
1~999 seconds. If user doesn
’
t mark and set the time, the alarm recording will continue recording until
alarm is reset.
6. Click
OK
to accept the new settings and
Cancel
to exit without saving.
-
PTZ preset point
Position the PTZ camera based on the preset point setting.
Beside the PTZ preset point check box, click
Detail
. In the
Trigger PTZ Preset Setting dialog box, select the PTZ camera
number then select the
Enable
check box. Select the position
of the PTZ camera when the alarm is activated and ended. For
the PTZ camera end point, user can also select on preset
position or
Auto Pan
between preset position groups.
-
Send to CMS (Central Management System)
Enable/disable the selected camera to send video
to CMS when the alarm is activated.
Beside the Send to CMS check box, click
Detail
. In
the CMS Setting, select the camera to
enable/disable sending the video to CMS. Enable
All
to select all cameras. Then, click
OK
to accept
the new settings and
Cancel
to exit without saving.
