61
-
Enlarge Camera View
Switch to only display video in Preview mode from where the alarm is activated.
a. Select the camera from drop down list to specify which camera video to be enlarged on screen when
the alarm is triggered.
b.
Retrieve time:
set the waiting duration before system switching back to original Preview mode. If the
retrieve time is un-mark, the alarm video will keep enlarging until user switch back to Preview mode
manually. The retrieve time range is 0~ 600 seconds.
-
Relay Output
Set to enable/disable the relay operation when the alarm is activated and to extend additional time in
second before it stops the relay operation.
1. Beside the Relay Output check box, click
Detail
.
2. In the Alarm Relay dialog box, select from the available relay list and in the
Status
column, set to
on/off the relay operation when the alarm is activated.
3. In
the
Retrieve time
check box, you may enable/disable to extend the relay operation time and set the
duration in second.
4. Click
OK
to exit and accept the setting and
Cancel
to exit without saving the setting.
