49
Enter the IP address of DNS if it is available.
-
MAC Address:
An identifier hardware address of DVR unit that is assigned by the manufacturer for
identification. User don
’
t need to fill in, it will generated by system automatically.
Obtain an IP automatically (DHCP):
Assign the IP address by local DHCP server to DVR system.
PPPOE:
Point-to-Point Protocol over Ethernet is a network protocol for encapsulating PPP frames in
Ethernet frames. It is used mainly with ADSL services. If your network is using ADSL service connecting to
internet, and then, select PPPOE mode. Enter
User ID
and
Password
that is given by your ISP for PPPOE
connecting authority.
DDNS:
DDNS(Dynamic Domain Name Service) is a data query service mainly used on the Internet for
translating domain names into Internet addresses. Users can register their own domain name on
http://ddns.avers.com.tw
. (See
Appendix A
)
-
Domain Name
Enter the domain name that user has registered.
-
Password
A password use to access DDNS that user has setup when register the domain name
-
DDNS Server Name
Select your DDNS server. The default only has one DDNS server now. It may provide more DDNS in
future.
-
DDNS Server Port
Fill in the port that connects to DDNS server. Default is 1053.
(4) Remote Upgrade Configuration
A port is using for the remote firmware upgrade through network.
(5) PCViewer Configuration
Activate
Enable Anonymous Login
to remotely access the DVR server without the need of password. Fill in
the
PCViewer PORT
for remote accessing connection.
(6) Network Time Synchronization
Adjust the DVR system time same as network time server. Fill in the
Time Server
IP address or domain name
and select the
Time Zone
. User can enable
Automatic Synchronize
at
to set automatic synchronize time on a
daily basis. Or, user can click
Synchronize Time Right Now
to adjust time right away.
(7) Other Configuration
-
Enable White List
i
Without any
IP/IP range
is assigned in White List table, none of IP address/IP range is allowed to access
DVR when White List function is enabled.
An access permit list for the remote accessing of DVR server. Enter the IP address and click
Add
. Or,
enter a range of IP address and click
Add
. To delete the IP from the list, select the IP and click
Delete
button. To reset the input, click
Clear
button.
