62
-
Send E-mail
Send an electronic text message. Next to the Send Email check box, click
Detail
.
In the E-mail Setting dialog box, click
OK
to exit and save the setting and
Cancel
to exit without saving
the setting.
(1)
(2)
(3)
(1) Mail Server
Enter the
SMTP Server
and
port
. If your e-mail system requires user identification, enable
Authentication
check box and enter
ID
and
Password
.
(2) Mail
Fill the mailing information.
9
From:
Enter the sender e-mail address.
9
To and CC:
Enter the recipient email address and separate it with comma or a semicolon (;).
9
Subject:
Enter the message title.
9
Message:
Type the message.
(3)
Snapshot
When send out the email, the DVR system will snapshot image of the selected camera channel.
9
Select Camera:
Select the channel that will be snapshot when alarm email is sending out.
9
Video Size:
Select the size of video that will be taken when snapshot. Auto means default size
that chosen by DVR system.
-
Start Recording
Record the video from the selected camera.
1. Next to the Start Recording check box, click
Detail
.
2. In the Alarm Recording Setting dialog box, select the
camera to enable/disable video recording. Enable
All
to select all cameras.
3. In the Frame Rate selection, select
As Setting
to
record the number of frames based on the Recording
Setting.
4. In
the
Start Record prior
text box, mark and set the
number in second for the program to begin recording
after the alarm has been trigger. The time range is
1~10 seconds.
5. In
the
Stop Record after
text box, mark and set the
