Page|69
www.avenview.com
•
Please see more details in [System settings: Box ID, RS232, Ethernet] section.
•
If multiple units are used, user can set different [Box ID] (#1 - #99) or IP address in each Box for
individual control. For IR control, the [Box ID] number range is #1 - #9.
•
When all EdgePro or IR extenders are installed together in the control range of single remote
controller, user can do individual EdgePro control through below method.
•
Press
［
851
］，
all the box OSD will be locked except ID #1. The LED light will be flashing
in the locked unit and only ID #1 can be operated through OSD menu.
•
Press
［
853
］，
all the box OSD will be locked except ID #3. The LED light will be flashing
in the locked unit and only ID #3 can be operated.
•
Press
［
850
］，
all the box OSD will be unlocked and can be operated through remote
controller at the same time.
User can connect all EdgePro in one Ethernet Router (WiFi Router or switch/hub) through LAN ports
and set different Static IP address for each Box, then use WebGUI virtual keys or Windows PC tool to
control each EdgePro independently. Default IP address is 192.168.0.100. TCP Server port is 1226 and
Telnet port is 23.
User can connect all EdgePro in one Ethernet Router (WiFi Router or switch/hub) through LAN ports
and set different Static IP address for each Box, then use WebGUI virtual keys or Windows PC tool to
control each EdgePro independently. Default IP address is 192.168.0.100. TCP Server port is 1266 and
Telnet port is 23.
13.3
Convenient Setting and PC tools in multiple unit application
13.3.1
Setup by Remote Controller
13.3.2
Setup by Ethernet
14
WebGui and PC tool
