Page|67
www.avenview.com
Select input port and set EdgePro output resolution to be the same as projector native
resolution.
User needs to apply a signal source while executing video wall [Overlap] value setting. The
Signal source resolution should be the same as per the Excel calculation. To apply 1080p or 4k
signal is recommended. After system setup, user can use any input resolution.
Press [INFO] hotkey to check if the final in/out timings are the same as expected.
Usually, one 4k signal source can be applied for up to 20 meters screen through 4x EdgePro & 8x
projectors. If bigger screen is required, user can apply multiple signal sources through multiple
synchronized media player or multiple output display card to achieve higher system resolution.