Page|18
www.avenview.com
The range of Box ID is 0 ~ 99 for RS2323 command.
If user uses remote controller to execute system operation, the Box ID range is 0 ~ 9.
RS232 is designed with DB-9 connector. User can select baud rate between 11520 and 9600.
We can provide UART protocol for the control from RS-232, USB, or Ethernet.
User needs to connect EdgePro to Wi-Fi Router or switch/hub through RJ45 to LAN port. Then
User can control the system through Ethernet.
Crossover UTP cable can be used for direct connection between PC and EdgePro. User needs to
set PC TCP/IPv4 with the same domain as EdgePro (for instance, to set IP address at
192.168.0.105) and subnet mask at 255.255.255.0).
Open web browser (Google Chrome or Internet Explorer) and input EdgePro IP address
(default IP address is 192.168.0.100), user can see EdgePro WebGUI and see virtual keys and
menu similar to OSD for further system operation. There is no additional software tool is
required.
If user can’t connect the network, please power off/on EdgePro again to let PC detect EdgePro
network system.
6.6.1
Box ID
6.6.2
RS232 settings
6.6.3
Ethernet
