Avenview MLT-EDGEPRO-2X2, Руководство по эксплуатации продукта

Страница: 33 / 57

3 . 8
Geometry Correction and Edge Blending
www.avenview.com
Page 32
[ Corner ] - Corner Curve Adjustment
• [Corner] function is to adjust the position of the image
corners but the center points of each edge will
maintain at the same location.
The function performs a
smooth curved line and not straight line.
• Left photo to show the image had been changed with
[Corner] curve adjustment.
[ Edge ] - Edge Curve Adjustment
[ E dge] adjustment, the image Corner points will maintain at the same location without change. The image will change
based on a smooth line between two corner points of the edge.
• [ E dge] function is to adjust the position of the image edge ( center point ) and the corner points together.
The image change is based on a smooth curved line but not straight line.
• Below is to show the three edges positions had been adjusted (next page).