Avenview MLT-EDGEPRO-2X2, Руководство по эксплуатации продукта

Страница: 9 / 57

2.1 PACKAGE CONTENTS
Before you start the installation of the MLT-EDGEPRO-2X2, please ensure that the packaging has the listed items below.
1
MLT-EDGEPRO-2X2 X 1
2
X 1
3
IR REMOTE 28 KEYS X 1
4
USER MANUAL X 1
2.2 BEFORE INSTALLATION
www.avenview.com
Page 2
www.avenview.com
Page 8
POWER BRICK (12V 3 A) + C 13
Either Standard US power cord *
or International power cord (UK,EU,AUS)
* Based on the order request.
• Place the product on an even and stable surface. If the product falls, it may cause an injury to a person or malfunction.
• Do not place the product in high temperatures (over 50°C), or low temperature (under 0°C) or high humidity.
• Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.
• Do not twist or pull by force ends of the UTP /HDMI cable. It can cause malfunction.
• Keep the device away from water. If the unit becomes wet, power off immediately.
• Installation of the equipment must comply with local and national electrical codes.
• Take care when connecting units to the electrical power circuit, incase the maximum rated circuit is not overloaded
ATTENTION
• To prevent airflow restriction, allow clearance around the ventilation openings to be at least: ONE Inch (25.4 mm).
•
Unauthorized changes or modifications could void the user's authority to operate the equipment.
Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents.
•
IR Extender cable X 1