P
lease note the
changes
can only be saved in
connected
PC but not
within the
Edgepro.
T
o load the file from their PC
to the Edgepro
when the system is powered Off
then
On.
Except [Warp Adjustment]
mode
,
all the other settings should be implemented in Edgepro
device memory
.
TAB [Edge Blend]
T
o set the location and pixel number for edge blending based on geometry alignment.
To align the color in edge blending area through Gamma adjustment.
This function will extend the gamma
adjustment to separate
R
GB in the future.
[Offset]
to execute
the
black level
to
uplift.
This function can be implemented
to
EdgePro
device memory.
TAB Color [Uniformity] correction
To
set different gain and offset value in
R
GB separately
for
uniformity adjustment.
The minimum area for color uniformity adjustment is 6
4
x6
4
pixels.
Please
adjust
the
color uniformity in several steps in
the
surrounding area to avoid big transition in the color.
TAB [Color] adjustment
To perform
white balance and color correction in
each
projector.
Also
to try
to do
color
adjustment from
the
projector first.
When the
color difference
is not fixed
,
go to
[Color] function to do
independent RGB Gain and
Offset adjustment
Any color adjustment will reduce the color dynamic range.
T
hen apply color adjustment, different input sources
may vary in results shown.
www.avenview.com
Page 17
Содержание MLT-EDGEPRO-2X2
Страница 10: ...M www avenview com Page 9...
Страница 55: ...Notes www avenview com Page 54...
