manualshive.com logo in svg

Aventech AIMMS-20, Руководство по эксплуатации

Поделиться
Скачать
Aventech AIMMS-20 Скачать руководство пользователя страница 8

 

Rev:     

1.00 

Date:

    11.22.2013 

Page:

   8 of  40

 

AIMMS-20 

OPERATING MANUAL 

 

Document-P/N: 

AIMMS20-OM 

 

© Aventech Research Inc. 2013. All Rights Reserved.

 

1   INTRODUCTION 

 

The Aventech Research Inc. AIMMS-20 (Aircraft Integrated Meteorological 
Measurement System) is an integrated, turn-key system for measuring accurate, 
real-time meteorological data on airborne platforms. The meteorological data set 
includes temperature, humidity, three-dimensional winds (speed, direction and 
vertical) and turbulence. The data generated by the system is broadcast in real-time 
via an RS-232 serial communications link to either a GPS navigation system or data 
acquisition system.  
 
This document provides a step by step description on how to setup and calibrate 
the AIMMS-20 instrumentation for your aircraft or helicopter airframe. Section 2 
provides an overall description of the components of the AIMMS-20 system. Section 
3 provides detail on how to perform the initial setup of the system followed by a 
description of the flight manoeuvres that must be performed in order to calibrate the 
system. In order to set up and calibrate the system, the user will utilize Aventech’s 
aimcfg PC-based software utility. A user’s guide for the aimcfg software utility is 
provided in Section 4. Technical specifications for the system are provided in 
Section 5. If the end user wishes to integrate the AIMMS-20 serial broadcast data 
stream into their dedicated data acquisition system, details of the broadcast format 
can be found in Appendix A. 
 

Содержание AIMMS-20









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды