manualshive.com logo in svg

Aventech AIMMS-20, Руководство по эксплуатации

Поделиться
Скачать
Aventech AIMMS-20 Скачать руководство пользователя страница 3

 

Rev:     

1.00 

Date:

    11.22.2013 

Page:

   3 of  40

 

AIMMS-20 

OPERATING MANUAL 

 

Document-P/N: 

AIMMS20-OM 

 

© Aventech Research Inc. 2013. All Rights Reserved.

 

NOTICES 

 

WARRANTY 

 

Aventech Research Inc. products are warranted to be free from defects in material and 
workmanship under normal use and service for a period of one year beginning on the 
date of shipment. This warranty extends only to the original buyer or end-user customer 
of an Aventech Research Inc. authorized reseller. This warranty does not apply to any 
product which, in Aventech Research Inc’s opinion, has been misused, altered, 
neglected, contaminated, or damaged by accident or abnormal conditions of operation 
or handling. 
 
Aventech Research Inc’s warranty obligation is limited, at Aventech Research Inc’s 
option, to refund of the purchase price, free of charge repair, or replacement of a 
defective product which is returned within the warranty period. 
 
To obtain warranty service, return the product to the nearest Aventech Research Inc. 
authorized reseller, or direct to the address provided below: 
 
    Aventech 

Research 

Inc. 

    110 

Anne 

Street 

South, 

Unit 

23 

    Barrie, 

Ontario, 

Canada 

L4N 

2E3 

    Tel: 

 

 

(705) 

722-4288 

    Fax: 

 

 

(705) 

722-9077 

    E-mail: 

[email protected] 

 

 
Shipping costs to Aventech Research Inc. are the responsibility of the end customer 
(FOB Destination). Aventech Research Inc. assumes no risk for damage in transit. 
Following warranty repair, the product will be returned to Buyer, transportation prepaid 
(FOB Destination). If Aventech Research Inc. determines that failure was caused by 
neglect, misuse, contamination, alteration, accident, or abnormal condition of operation 
or handling, including overvoltage failures caused by use outside the product’s specified 
rating, or normal wear and tear of mechanical components, Aventech Research Inc. will 
provide an estimate of repair costs and obtain authorization before commencing the 
work. Following repair, the product will be returned to the Buyer transportation prepaid 
and the Buyer will be billed for the repair and return transportation charges (FOB 
Shipping Point). 
 
Aventech Research Inc. warrants that product firmware will operate substantially in 
accordance with its functional specifications. Aventech Research Inc. does not warrant 
that firmware will be error free or operate without interruption. 
 

Содержание AIMMS-20









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды